Xplora Strobe Light

 

Diver’s best choice for signal purpose for its high intensity and notability of getting attentions to prevent the accident of missing.  With easy-grip housing for convenient carriage.

*Optional Velcro strap in 30 cm or 45 cm is available. 

​

Specifications

​

Bulb: Cree XML2-U4

Burn Time: 9+ hours

Flash Rate: 34~40 times per minute

Battery: 2 x Alkaline AA-cell (not included)

Waterproof: 60M

Length: 16 cm

​

Changing Batteries:

1. Rotate the lens cap counter clockwise to remove the batteries

2. Install two new AA 1.5V batteries according to the polarity marking indicated. 

3. Batteries negative pole face down.

4. Reinstall the cap onto the housing, rotating the cap clockwise. 

5. Improper installation of the batteries will damage the light and void the warranty. 

6. Screw the cap tightly and check if the light is on.

7. Unscrew the cap to turn it off.

​

Caution:

Keep the O-rings and sealing surfaces clean by occasionally clean and lightly lubricate the O-rings and lens cap threads with silicone grease. Never mix fresh and used batteries. Never mix different brands or chemistry types. Always remove drained batteries immediately. Remove the batteries during long period of storage. Store the light in a cool and dry place away from direct sunlight. Erroneous usage may easily cause leakage. Prior to use of this product, you should determine the safety, suability and fitness of the product for its intended use. The Manufacturer assumes no liability for problem arising out of erroneous usage.

​

Magnetic switch